2000 Honda Civic SiFACTORY OEM SERVICE PROCEDURE

Master Switch

Remove power window master switch. See MASTER POWER WINDOW SWITCH  under REMOVAL & INSTALLATION. Using an ohmmeter, check continuity of switch terminals with switch in indicated positions. If continuity is not as specified, replace switch. See Figure -Figure . See appropriate POWER WINDOW MASTER SWITCH TEST table.

POWER WINDOW MASTER SWITCH TEST (CIVIC COUPE & HATCHBACK)

Switch Position Main Switch (1) Continuity Between Terminals
Driver's Switch ..... (2)
Passenger's Switch
Off On A2, A5 & A7
Off A2 & A7
Up On A2 & A5; A6 & A7
Off A6 & A7
Down On A2 & A6; A5 & A7
Off A2 & A6
(1) For terminal identification, see Figure .
(2) See SWITCH INPUT TEST  . See Figure .
POWER WINDOW MASTER SWITCH TEST (CIVIC SEDAN)

Switch Position Main Switch (1) Continuity Between Terminals
Left Front Switch ..... (2)
Right Front Switch
Off On B1, B11 & C1
Off B1 & B11
Up On B1 & B2; B11 & C1
Off B1 & B2
Down On B1 & C1; B2 & B11
Off B2 & B11
Right Rear Switch
Off On B9, B10 & C1
Off B9 & B10
Up On B8 & B9; B10 & C1
Off B8 & B9
Down On B8 & B10; B9 & C1
Off B8 & B10
Left Rear Switch
Off On B14, B16 & C1
Off B14 & B16
Up On B14 & B15; B16 & C1
Off B14 & B15
Down On B14 & C1; B15 & B16
Off B15 & B16
(1) For terminal identification, see Figure .
(2) See SWITCH INPUT TEST  . See Figure .
POWER WINDOW MASTER SWITCH TEST (CR-V)

Switch Position Main Switch (1) Continuity Between Terminals
Left Front Switch ..... (2)
Right Front Switch
Off On A1, A2 & B1
Off A1 & A2
Up On A1 & A9
Off A1 & A9
Down On A2 & A9
Off A2 & A9
Right Rear Switch
Off On A13, A14 & B1
Off A13 & A14
Up On A6 & A14
Off A6 & A14
Down On A6 & A13
Off A6 & A13
Left Rear Switch
Off On A7, A8 & B1
Off A7 & A8
Down On A8 & A12
Off A8 & A12
Up On A7 & A12
Off A7 & A12
Switch Light ..... (3)
(1) For terminal identification, see Figure .
(2) See SWITCH INPUT TEST  . See Figure .
(3) Continuity should exist between terminals C1 and C2 in one direction only.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.