1994 Honda Passport DXFACTORY OEM SERVICE PROCEDURE

Engine Controls - Specifications: Capacities

BATTERY SPECIFICATIONS

Application Amp Hr. Rating
Passport 60
FLUID CAPACITIES

Application Quantity
Crankcase (Includes Filter)
2.6L 4.4 Qts. (4.2L)
3.2L 5.7 Qts. (5.4L)
Cooling System (Includes Heater)
2.6L 9.5 Qts. (9.0L)
3.2L
Automatic Transmission 9.3 Qts. (8.8L)
Manual Transmission 9.7 Qts. (9.2L)
Automatic Transmission (Dexron-II)
Dry Refill 9.1 Qts. (8.6L)
Manual Transmission
2.6L 2.4 Qts. (2.2L)
3.2L 3.1 Qts. (2.9L)
Differential (1)
Front Axle 1.6 Qts. (1.5L)
Rear Axle 1.9 Qts. (1.8L)
Transfer Case (2) 1.5 Qts. (1.4L)
(1) On standard differentials, use SAE 80W-90/API GL-5 gear oil. On limited slip models, use SAE 80W-90/API GL-5 gear oil rated for limited slip axles.
(2) Use SAE 5W-30 SF engine oil with ambient temperatures less than 90°F (32°C) or SAE 40W with temperatures greater than 90°F (32°C).
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.