1987 Honda Prelude Base, AutomaticFACTORY OEM SERVICE PROCEDURE

EGR System: Operation: CARBURETED

The EGR system operates only when the engine is at normal operating temperature and only while accelerating or cruising. The vacuum control signal is carburetor ported vacuum. A thermosensor eliminates EGR when engine coolant is below normal operating temperature.

During vehicle deceleration, manifold vacuum rises and turns on EGR control switch. The EGR control solenoid valve closes and cuts off EGR flow. Vacuum is provided to EGR control switch only above 15 MPH, when the speed sensor opens the throttle opener solenoid valve.

EGR control valves A and B use a ported vacuum signal to control a manifold vacuum flow large enough to operate the EGR valve. With this system, the EGR valve is operated by a signal proportional to airflow through carburetor venturi, ensuring correct EGR flow.

EGR control valves A and B receive vacuum from vacuum switch C.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.