Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1997 Geo Metro BaseFACTORY OEM SERVICE PROCEDURE
Service Precautions
WARNING:
To avoid injury from accidental air bag deployment, read and carefully follow all service precautions. Deactivate air bag system before performing any repairs. See DISABLING & ACTIVATING AIR BAG SYSTEM.
- Wait at least 10 minutes after removing AIR BAG fuse before removing or servicing any air bag related component.
- Never use air bag system components from another vehicle.
- DO NOT expose air bag module to temperatures greater than 150°F (65°C).
- Never attempt to disassemble any air bag component.
- DO NOT dispose of undeployed air bag inflator module. Deploy inflator module before disposing.
- When handling inflator module, hold with deployment cover facing away from your body.
- Discard inflator module if it has been dropped 3 feet or more.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.