Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1997 Geo Metro BaseFACTORY OEM SERVICE PROCEDURE
Alignment Specifications: PRIZM
WHEEL ALIGNMENT SPECIFICATIONS (PRIZM) (1)
| Application | Preferred | Range | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Camber (2) | |||||||||
| Front | -.17 | -.9 To .6 | |||||||
| Rear | -.92 | -1.67 To -.17 | |||||||
| Caster (2) | |||||||||
| Front | 1.33 | .58 To 2.08 | |||||||
| Toe-In (2) | |||||||||
| Front | .1 | -.1 To .3 | |||||||
| Rear | .4 | .2 To .6 | |||||||
| Toe-In (3) | |||||||||
| Front | .05 (1.5) | -.05 To .15 (-1.5 To 4.0) | |||||||
| Rear | .2 (5) | .1 To .3 (2.5 To 7.5) | |||||||
| Toe-Out On Turns (2) | |||||||||
| Inner | 32.5 | N/A | |||||||
| Outer | 30.5 | N/A | |||||||
|
|||||||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.