1996 Geo Tracker Base, 4D Utility, RWDFACTORY OEM SERVICE PROCEDURE

Automatic Transmissions DTCS

AUTOMATIC TRANSMISSIONS DTCS

DTC OEM Code Description
N/A 12 System Operation Normal
P0705 34 Transmission Range Switch Circuit
P0720 31 VSS (Transmission) Circuit
P0725 52 Engine Speed Input Circuit
P0741 29 TCC Circuit Performance
P0743 25 TCC Solenoid Circuit
P0743 26 TCC Solenoid Circuit
P0751 27 No. 1 Shift Solenoid Performance
P0753 21 No. 1 Shift Solenoid Circuit
P0753 22 No. 1 Shift Solenoid Circuit
P0756 28 No. 2 Shift Solenoid Performance
P0758 23 No. 2 Shift Solenoid Circuit
P0758 24 No. 2 Shift Solenoid Circuit
P0771 29 TCC Circuit Performance
P0773 25 TCC Solenoid Circuit
P0773 26 TCC Solenoid Circuit
P1700 32 TP Sensor Circuit
P1700 33 TP Sensor Circuit
P1705 51 ECT Sensor Signal Input
P1710 35 VSS (Speedometer) Back-Up Signal Circuit
P1715(1)(2) N/A Park/Neutral Position Switch Circuit
P1875 37 4WD "LO" Switch Circuit
(1) No Flash Code set. Use scan tool method to retrieve trouble code.
(2) DTC P1715 applies to Tracker only.
Chapter Navigation
Return to Chapter: DTC Index
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.