1993 Geo Tracker LSi, AutomaticFACTORY OEM SERVICE PROCEDURE

Service Intervals & Specifications

REPLACEMENT INTERVALS (1)

Component Miles
Air Filter 30,000
Charcoal Canister 100,000
Coolant 30,000
Drive Axle Lubricant (3)
Fuel Filter 30,000
Ignition Wires & Distributor Cap 60,000
Oil & Filter 7500
Oxygen Sensor 80,000
PCV Valve 50,000
Spark Plug 30,000
Timing Belt 60,000
Transfer Case (3)
Transmission Lubricant
A/T (2) 100,000
M/T (3)
(1) Under normal driving conditions.
(2) Change A/T cooler hoses at 45,000 miles.
(3) Change at 7500 miles and then every 30,000 miles thereafter.
BELT ADJUSTMENT

Application (1) Belt Deflection
A/C Compressor .20-.25" (5.1-6.4 mm)
Alternator
New Belt .20-.27" (5.1-7.0 mm)
Used Belt (2) .24-.31" (6.1-8.0 mm)
P/S Pump .24-.35" (6.1-8.9 mm)
Water Pump .20-.32" (5.1-8.1 mm)
(1) Deflection is with 22 lbs. (10 kg) pressure applied midway on longest belt run.
(2) Used belt is a belt in operation for more than 5 minutes.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.