WHEEL ALIGNMENT SPECIFICATIONS (PRIZM)

Application

Preferred

Range

Prizm ⁽¹⁾

Camber ⁽²⁾

Front

-0.15

-0.9 To 0.6

Rear

-0.58

-1.33 To 0.17

Caster ⁽²⁾

Front

1.36

0.61 To 2.11

Toe-In ⁽²⁾

Front

0.06

0 To 0.16

Rear

0.32

0.24 To 0.40

Toe-In ⁽³⁾

Front

0.04 (1.0)

0 To 0.08 (0 To 2.0)

Rear

0.16

0.12 To 0.20 (3.0 To 5.0)

Prizm GSi (A/T) ⁽¹⁾

Camber ⁽²⁾

Front

-0.20

-0.95 To 0.55

Rear

-0.68

-1.43 To 0.07

Caster ⁽²⁾

Front

1.45

0.70 To 2.20

Toe-In ⁽²⁾

Front

0.06

0 To 0.16

Rear

0.32

0.24 To 0.40

Toe-In ⁽³⁾

Front

0.04 (1.0)

0 To 0.08 (0 To 2.0)

Rear

0.16 (4.0)

0.12 To 0.20 (3.0 To 5.0)

Prizm GSi (M/T) ⁽¹⁾

Camber ⁽²⁾

Front

-0.27

-1.02 To 0.48

Rear

-0.68

-1.43 To 0.07

Caster ⁽²⁾

Front

1.36

0.61 To 2.11

Toe-In ⁽²⁾

Front

0.06

0 To 0.16

Rear

0.32

0.24 To 0.40

Toe-In ⁽³⁾

Front

0.04 (1.0)

0 To 0.08 (0 To 2.0)

Rear

0.16 (4.0)

0.12 To 0.20 (3.0 To 5.0)

⁽¹⁾	Front camber is adjustable. Front caster and rear caster and camber are not adjustable.

⁽²⁾	Measurement in degrees.

⁽³⁾	Measurement in inches (mm).

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Alignment Specifications: PRIZM

Use the Manual With the Right Hardware

When to See a Mechanic

Rather have a pro handle this?