1989 Geo Tracker Base, AutomaticFACTORY OEM SERVICE PROCEDURE

Repair and Diagnosis: Transmission: Clutches: Description

The clutch is a single disc type using a diaphragm spring to engage the pressure plate. On Metro, Spectrum and Tracker models, clutch is mechanically controlled by the clutch pedal, clutch cable, return spring, release fork and prelubricated release bearing. The system incorporates a clutch switch that disables the ignition unless the pedal is fully applied.

Chapter Navigation
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.