Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1989 Geo Spectrum L4-91.5 1.5LFACTORY OEM SERVICE PROCEDURE
Engine Mount
| Engine Mount (Front) Bracket To Support Member Bolts | 29.7 Foot Pound-Force (ft.lb) |
| Engine Mount (Front) To Bracket Bolts | 60.8 Foot Pound-Force (ft.lb) |
| Engine Mount (Front) To Engine Bolts | 28.2 Foot Pound-Force (ft.lb) |
| Engine Mount (Rear) To Bell Housing | 55.7 Foot Pound-Force (ft.lb) |
| Engine Mount (Rear) To Engine Bolt | 28.2 Foot Pound-Force (ft.lb) |
| Engine Mount (Rear) To Support Member Bolt | 60.8 Foot Pound-Force (ft.lb) |
| Engine Mount (Right Hand) To Bracket Bolts | 36.9 Foot Pound-Force (ft.lb) |
| Engine Mount (Right Hand) To Engine Bolts | 44.8 Foot Pound-Force (ft.lb) |
| Engine Mount Torque Rod Bracket To Engine Bolts | 55.7 Foot Pound-Force (ft.lb) |
| Engine Mount Torque Rod To Body Bracket Bolt | 42 Foot Pound-Force (ft.lb) |
| Engine Mount Torque Rod To Engine Bracket Bolt | 40.5 Foot Pound-Force (ft.lb) |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.