SBW CONTROL UNIT (SCU) DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION

DTC	Description
P0601-41	Internal Control Module Memory Check Sum Error
P0601-47	Functional Safety Level 3 S/W Fail
P0601-48	Functional Safety Level 2 S/W Fail
P1061-14	SBW Actuator Power Circuit Short to Ground or Open
P1061-15	SBW Actuator Power Relay Error
P1062-12	SBW Actuator Error - U/V/W Circuit Short to Battery
P1064-00	SBW Over Current Detection
P1065-00	SBW Parking Learning Uncompleted
P1069-00	SBW Actuator Running Error
P106B-00	SBW Actuator Driver Error
P106D-00	SBW Actuator Stuck - Initial Drive Error
P106D-13	SBW Actuator Stuck - Encoder Circuit Short to Ground or Open
P106D-14	SBW Actuator Stuck - U/V/W Circuit Short to Ground or Open
P106D-71	SBW Actuator Stuck
P106E-16	SBW Actuator Encoder Power - Circuit Short to Ground
P106E-17	SBW Actuator Encoder Power - Circuit Short to Battery
P28E5-77	Shift Motor Performance
P28E5-92	Shift Motor Performance
U0001-00	High Speed CAN Communication Bus
U1017-00	SBW CAN Communication Error
U1017-82	SBW CAN Communication Error
U1017-83	SBW CAN Communication Error

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

SBW Control Unit (SCU) DTCS