Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2023 Genesis Electrified GV70 AdvancedFACTORY OEM SERVICE PROCEDURE
Cluster Module DTCS
CLUSTER MODULE DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION
| DTC | Description |
|---|---|
| B1000-51 | Cluster Coding Not Programmed |
| B1001-52 | SCC Missing Error - without SCC unit or connector fault |
| B1001-55 | SCC Present Error - Coding code error |
| B1002-52 | EPB Missing Error - without EPB unit or connector fault |
| B1002-55 | EPB Present Error - Coding code error |
| B1003-52 | ABS Missing Error - without ABS unit or connector fault |
| B1003-55 | ABS Present Error - Coding code error |
| B1005-52 | Airbag Missing Error - without Airbag unit or connector fault |
| B1005-55 | Airbag Present Error - Coding code error |
| B1006-52 | PSB Missing Error - without PSB unit or connector fault |
| B1006-55 | PSB Present Error - Coding code error |
| B1007-52 | AFLS Missing Error - without AFLS unit or connector fault |
| B1007-55 | AFLS Present Error - Coding code error |
| B1008-52 | MDPS Missing Error - without MDPS unit or connector fault |
| B1008-55 | MDPS Present Error - Coding code error |
| B1010-52 | ESC Missing Error - without ESC unit or connector fault |
| B1010-55 | ESC Present Error - Coding code error |
| B1020-52 | TPMS Missing Error - without TPMS unit or connector fault |
| B1020-55 | TPMS Present Error - Coding code error |
| B1040-52 | LKA Missing Error |
| B1040-55 | LKA Present Error |
| B1080-52 | ECS Missing Error - without ECS unit or connector fault |
| B1080-55 | ECS Present Error - Coding code error |
| B1092-52 | AHLS Missing Error |
| B1092-55 | AHLS Present Error |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.