Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2022 Genesis GV80 2.5T Advanced, AWDFACTORY OEM SERVICE PROCEDURE
ETC (Electronic Throttle Control) System: Specifications: Specification
- Type: Hall IC non-connect sensor type
[TPS1]
| Item | Duty (%) | Output Voltage (V) [Supply Voltage = 5V] |
|---|---|---|
| C.T | 8.5 - 11.5% | 0.43 - 0.58 |
| W.O.T | 88 - 96% | 4.4 - 4.8 |
[TPS2]
| Item | Duty (%) | Output Voltage (V) [Supply Voltage = 5V] |
|---|---|---|
| C.T | 88.5 - 91.5% | 4.43 - 4.58. |
| W.O.T | 2 - 10% | 0.1 - 0.5 |
ETC Motor
| Item | Specification | |
|---|---|---|
| New | Aged | |
| Coil Resistance (Ω) | 1.9 ± 10% | R < 2.8 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.