Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2022 Genesis G80 2.5T Advanced, AWDFACTORY OEM SERVICE PROCEDURE
Fuel Delivery System
| Items | Specification | |
|---|---|---|
| Fuel Tank | Capacity | 65L (17.1 U.S.gal., 68.6 U.S.qt., 57.1 Imp.qt.) |
| 73L (19.2 U.S.gal., 77.1 U.S.qt., 64.2 Imp.qt.) | ||
| Fuel Filter | Type | Paper type |
| Fuel Pressure | Low Pressure Fuel Line | 480 ~ 520 kPa (4.8 ~ 5.2 bar, 4.89 ~ 5.3 kgf/cm2 ) |
| High Pressure Fuel Line | 1.9 - 34.3 MPa (20 ~ 350 kgf/cm, 284.4 - 4978.1 psi) | |
| Fuel Pump | Type | Electrical, in-tank type |
| Driven by | Electric motor | |
| High Pressure Fuel Pump | Type | Electronic type |
| Driven by | Camshaft | |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.