Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGENESIS2021GV80 2.5T ADVANCED, AWDREPAIR AND DIAGNOSISGENERAL INFORMATIONDTC INDEXADVANCED DRIVER ASSISTANCE SYSTEMS PARKING DTCS
2021 Genesis GV80 2.5T Advanced, AWD
Advanced Driver Assistance Systems Parking DTCS
2021 Genesis GV80 2.5T Advanced, AWDSECTION Advanced Driver Assistance Systems Parking DTCS
ADVANCED DRIVER ASSISTANCE SYSTEMS PARKING DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION
| DTC | Description |
|---|---|
| C1104-17 | Ignition Voltage High |
| C1105-16 | Ignition Voltage Low |
| C1128-11 | PDW Front Sensor source Voltage |
| C1129-11 | PDW Rear Sensor Source Voltage |
| C1362-31 | Camera Signal Failure |
| C1368-87 | PDW Sensor - Rear Left Outer (Comm) |
| C1368-96 | PDW Sensor - Rear Left Outer (HW) |
| C1369-87 | PDW Sensor - Rear Left Inner (Comm) |
| C1369-96 | PDW Sensor - Rear Left Inner (HW) |
| C136A-87 | PA Sensor - Rear Left (Comm) |
| C136A-96 | PA Sensor - Rear Left (HW) |
| C136B-87 | PA Sensor - Rear Right (Comm) |
| C136B-96 | PA Sensor - Rear Right (HW) |
| C136C-10 | PDW Sensor LIN Short |
| C136D-10 | RSPA Sensor LIN Short |
| C1370-87 | PDW Sensor - Rear Right Inner (Comm) |
| C1370-96 | PDW Sensor - Rear Right Inner (HW) |
| C1371-87 | PDW Sensor - Rear Right Outer (Comm) |
| C1371-96 | PDW Sensor - Rear Right Outer (HW) |
| C1372-87 | PDW Sensor - Front Right Outer (Comm) |
| C1372-96 | PDW Sensor - Front Right Outer (HW) |
| C1373-87 | PDW Sensor - Front Right Inner (Comm) |
| C1373-96 | PDW Sensor - Front Right Inner (HW) |
| C1374-87 | PDW Sensor - Front Left Inner (Comm) |
| C1374-96 | PDW Sensor - Front Left Inner (HW) |
| C1375-87 | PDW Sensor - Front Left Outer (Comm) |
| C1375-96 | PDW Sensor - Front Left Outer (HW) |
| C1376-87 | PA Sensor - Front Left (Comm) |
| C1376-96 | PA Sensor - Front Left (HW) |
| C1377-87 | PA Sensor - Front Right (Comm) |
| C1377-96 | PA Sensor - Front Right (HW) |
| C1528-11 | PDW Switch Indicator Failure - Short to GND |
| C1528-12 | PDW Switch Indicator Failure - Short to IGN |
| C1530-11 | PDW Switch Failure |
| C1531-11 | PA Switch Failure |
| C1604-49 | ECU Hardware Error |
| C1611-87 | CAN Time-Out EMS |
| C1612-87 | CAN Time-Out TCU |
| C1613-86 | CAN Signal Error EMS |
| C1616-88 | C-CAN Bus OFF |
| C1628-87 | CAN Time-out Cluster |
| C1643-87 | CAN Time-Out Yaw Rate & G Sensor |
| C1646-86 | CAN Message Failure TCU |
| C1651-87 | CAN Time-Out EPB |
| C1652-86 | CAN Signal Error EPB |
| C1656-86 | CAN Signal Error Cluster |
| C1659-87 | CAN Time-Out SAS |
| C166B-87 | CAN time-out Wheel Speed Sensor |
| C1671-86 | Signal LAT_ACCEL or LONG_ACCEL or YAW_RATE or YL_PRES_STAT not Valid |
| C1687-87 | CAN Time-out MDPS |
| C1688-86 | CAN Message Failure MDPS |
| C1694-87 | CAN Time-Out FATC |
| C1695-86 | CAN Message Failure FATC |
| C16B2-86 | WHL_SPD Checksum/Alive Counter Error |
| C1702-46 | Variant Coding Error |
| C1812-87 | CAN Time-out CGW |
| C1814-86 | CAN Message Failure - SAS |
| C1817-86 | CAN Message Failure CGW |
| C181C-87 | CAN Time-Out LVR |
| C1834-87 | CAN Time-Out IEB |
| C1835-86 | CAN Message Failure ESC/iEB |
| C1836-86 | CAN Message Failure LVR |
| C2247-86 | PA failure for MDPS Steering Control |
| C2249-86 | RSPA failure for ESC/iEB Control |
| C2250-86 | RSPA failure for PT Assist |
| C2251-86 | RSPA Failure for IBU Control |
| C2252-86 | CAN Message Failure IBU |
| C2253-87 | CAN Time-Out IBU |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.