2021 Genesis GV80 2.5T Advanced, AWDFACTORY OEM SERVICE PROCEDURE

Multi Function Switch: Function

MFSW* is connected to ICU* to form B-CAN network of the vehicle. MFSW* transmits the wiper & washer switch signal and the lamp switch signals via the B-CAN communication and controls the wiper and the headlamp fail safe function and the washer motor.

Component Name_ETM Description ETM
MFSW* "MULTI FUNCTION SWITCH" Multi Function Switch SD200-6
ICU* CGW SJB β†’ "ICU JUNCTION BLOCK"
β†’ "ICU JUNCTION BLOCK IPS CONTROL MODULE"
β†’ "ICU JUNCTION BLOCK"
β†’ [CGW+SJB] Integrated Central control Unit
β†’ Central Gate Way
β†’ Smart Junction Block
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.