2019 Genesis G70 2.0T Advanced, AWDFACTORY OEM SERVICE PROCEDURE

TCM Learning

  1. Overview and purpose of learning
    • The purpose is to ensure the initial operation safety by correcting the oil pressure differences between transmissions.
    • For relearning of TCM, process relearning by deleting existing contents using GDS when there is shift shock at gears 1-2-3-4-5-6-7-8.
  2. TCM learning condition
    • Transmission assembly and TCM replacement
    • Maintain the APS constantly during the upshift while shifting gear (10% < APS < 25%).
    • Repeat the above procedure least five times as shown in the pattern of illustration below.
  3. TCM learning procedure
    1. Condition
      • Engine in hot status (status with idle RPM stabilized)
      • ATF temperature: 30 ~ 95Β°C (86 - 203Β°F)
    2. learning procedure
      1. Stop learning
        • Repeat the shift pattern shown below five times or more with the brake stepped on.
        G13540077Courtesy of HYUNDAI MOTOR AMERICA
      2. Driving learning

        Maintain the throttle opening to a constant level with the gear in D position and increment from 1st to 8th gear and decelerate slowly.

        With (ON, throttle opening: 0%), decrement from 8th to 1st gear.

        Upshift throttle opening: 10 - 25%

        Repeat the driving pattern above five times or more.

        G13540078Courtesy of HYUNDAI MOTOR AMERICA
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.