Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2019 Genesis G70 2.0T Advanced, AWDFACTORY OEM SERVICE PROCEDURE
[Throttle Position Sensor (TPS)]
| Throttle angle (°) | Output Voltage (V) | Output Voltage (%) | ||
|---|---|---|---|---|
| TPS1 | TPS2 | TPS1 | TPS2 | |
| Full close (0) | 0.5 | 4.5 | 10 | 90 |
| 0.525 | 0.53 | 4.48 | 10.5 | 89.5 |
| Default position (5) | 0.74 | 4.26 | 14.8 | 85.2 |
| 10 | 0.98 | 4.02 | 19.5 | 80.5 |
| 20 | 1.45 | 3.55 | 29 | 71 |
| 30 | 1.93 | 3.07 | 38.6 | 61.4 |
| 40 | 2.41 | 2.6 | 48.1 | 51.9 |
| 50 | 2.88 | 2.12 | 57.6 | 42.4 |
| 60 | 3.36 | 1.64 | 67.1 | 32.9 |
| 70 | 3.83 | 1.17 | 76.7 | 23.3 |
| W.O.T (79.25) | 4.28 | 0.73 | 85.5 | 14.5 |
| Full open (87.15) | 4.65 | 0.35 | 93 | 7 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.