2017 Genesis G90 3.3T Premium, AWDFACTORY OEM SERVICE PROCEDURE

Description and Operation: Description

WARNING: This page is about a different car, the 2017 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.
  1. Power trunk drive unit (Trunk open)
    G11342486Courtesy of
    1. The trunk open switch operates. (Trunk outside handle switch, Crash pad switch, SMK trunk open button)
    2. The power trunk motor operates and motor gear rotates.
    3. The sector gear rotates.
    4. The drive arm connected to sector gear rotates.
    5. The push rod operates in the direction of the arrow.
    6. The end of the push rod pushes up the trunk.
  2. Power trunk drive unit (Trunk close)
    G11342487Courtesy of
    1. The trunk close switch operates.
    2. The power trunk motor operates and motor gear rotates.
    3. The sector gear rotates.
    4. The drive arm connected to the sector gear rotates.
    5. The push rod operates in the direction of the arrow.
    6. The end of the push rod pushes up the trunk.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.