Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2017 Genesis G80 3.8 Premium, AWDFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Refrigerant | 1.50 LBS. | 0.68 KG | R-134a | Approximate capacity. | S | ||
| Automatic Transmission Fluid | 3.8L Eng | 11.09 QTS. | 10.49 L | GS ATF SP-IV-RR Genesis/Hyndaui ATF SP-IV-RR | Approximate capacity. | S | |
| Brake Fluid | 0.80 QTS. | 0.75 L | FMVSS166 DOT-3 or DOT-4 | Approximate capacity. | S | ||
| Differential Gear Oil | AWD | Front | 0.74 QTS. | 0.7 L | Hypoid Gear Oil, API GL-5, SEA 75W-90 SHELL HD AXLE OIL 75W-90 or equivalent | Approximate capacity. | S |
| Differential Gear Oil | Rear | 1.48 QTS. | 1.4 L | Hypoid Gear Oil, API GL-5, SEA 75W-90 SHELL HD AXLE OIL 75W-90 or equivalent | Approximate capacity. | S | |
| Engine Coolant | 3.8L Eng | 8.88 QTS. | 8.4 L | Mixture of antifreeze and water Ethylene Gylcol base Coolant for aluminum radiator | Approximate capacity. | S | |
| Engine Oil | 3.8L Eng | 7.29 QTS. | 6.89 L | ACEA A5/B5, SAE 5W-30 | Approximate capacity. | S | |
| Fuel Tank | 20.34 GALS. | 76.99 L | S | ||||
| Transfer Case Fluid | 0.65 QTS. | 0.61 L | SHELL TF0870 | Approximate capacity. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.