2017 Genesis G80 3.8 Premium, AWDFACTORY OEM SERVICE PROCEDURE

Smart Junction Block DTCS

SMART JUNCTION BLOCK DIAGNOSTIC TROUBLE CODE IDENTIFICATION

DTC Description
DTC B160200 CAN Line Error (B-CAN)
DTC B160300 CAN Bus OFF (B-CAN)
DTC B235200 Dedicated DRL LH SCG
DTC B235300 Dedicated DRL RH SCG
DTC B251000 Head Lamp High RH SCG
DTC B251100 Head Lamp High LH SCG
DTC B251200 Head Lamp Low RH SCG
DTC B251300 Head Lamp Low LH SCG
DTC B251400 External Tail Lamp RH Circuit Short to Ground
DTC B251500 External Tail Lamp LH Circuit Short to Ground
DTC B251600 Front Fog Lamp Circuit Short to Ground
DTC B251700 Internal Tail Lamp Circuit Short to Ground
DTC B252200 Turn Signal LH Front Short to Ground
DTC B252300 Turn Signal LH Rear Short to Ground
DTC B252400 Turn Signal RH Front Short to Ground
DTC B252500 Turn Signal RH Rear Short to Ground
DTC B254200 Static Bending Lamp LH Short to GND
DTC B255000 Static Bending Lamp RH Short to GND
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.