2024 GMC Sierra EVFACTORY OEM SERVICE PROCEDURE

Installation Procedure

  1. GM6302611Courtesy of GENERAL MOTORS COMPANY

    Battery Charger (1) - Install

  2. GM6302609Courtesy of GENERAL MOTORS COMPANY

    Drive Motor Battery Charger Bracket (3) - Move into position

  3. CAUTION:

    Refer to Fastener Caution .

  4. Drive Motor Battery Charger Ground Bolt (2) - Tighten [2x] - Fastener SpecificationsΒ 
  5. Drive Motor Battery Charger Bolt (1) - Install and tighten [3x] - Fastener SpecificationsΒ 
  6. GM6302608Courtesy of GENERAL MOTORS COMPANY

    Drive Motor Battery Charger Bolt (1) - Install and tighten [4x] - Fastener SpecificationsΒ 

  7. GM6302474Courtesy of GENERAL MOTORS COMPANY

    Connect the high voltage electrical connector. (3) High Voltage Connectors

  8. Drive Motor Battery Charger Inlet Hose (2) @Battery Charger - Connect
  9. Retainer (1) - Engage
  10. GM6302473Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connector. (3)

  11. Connect the high voltage electrical connector. (2) High Voltage Connectors
  12. Retainer (1) - Connect
  13. GM6302472Courtesy of GENERAL MOTORS COMPANY

    Drive Motor Power Distribution Control Module Hose (2) @Battery Charger - Connect

  14. Retainer (1) - Engage
  15. Rear Suspension Cradle - Install - Rear Suspension Cradle Removal and Installation
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.