2018 GMC Terrain SLFACTORY OEM SERVICE PROCEDURE

Installation Procedure

    Fig 1: Fuel Tank Fuel Pump Module
    GM4596018Courtesy of GENERAL MOTORS COMPANY
  1. Install NEW O-Ring (2)
  2. Install Fuel Tank Fuel Pump Module (1)
  3. Fig 2: Fuel Tank Vent Hose
    GM4596019Courtesy of GENERAL MOTORS COMPANY
  4. Connect Fuel Tank Vent Hose (1) - Plastic Collar Quick Connect Fitting Service 
  5. Fig 3: Fuel Pump Lock Ring
    GM4596017Courtesy of GENERAL MOTORS COMPANY
  6. Install Fuel Pump Lock Ring (1) - CH 52075  Fuel Sender Lock Ring Wrench
  7. Fig 4: Fuel Pump Fuel Feed Hose
    GM4596012Courtesy of GENERAL MOTORS COMPANY
  8. Connect Fuel Pump Fuel Feed Hose (4) - Plastic Collar Quick Connect Fitting Service 
  9. Connect Fuel Tank Vent Hose (3) - Plastic Collar Quick Connect Fitting Service 
  10. Connect Evaporative Emission Canister Vent Hose (2)Plastic Collar Quick Connect Fitting Service 
  11. Connect Electrical Connector (1)
  12. Install Fuel Tank - Fuel Tank Replacement (FWD) 
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.