2018 GMC Terrain SLFACTORY OEM SERVICE PROCEDURE

Installation Procedure

  1. Install Accessory AC and DC Power Control Module (2).
  2. Connect the electrical connector.
  3. Install Accessory AC and DC Power Control Module Bolt (1) and tighten [3x] 2.5 N.m (22 lb in)
  4. Fig 1: Front Floor Console Rear Trim Panel
    GM4743953Courtesy of GENERAL MOTORS COMPANY
  5. Install Front Floor Console Rear Trim Panel - Right Side (1).
  6. Fig 2: Front Floor Console Rear Trim Panel
    GM4743952Courtesy of GENERAL MOTORS COMPANY
  7. Install Front Floor Console Rear Trim Panel - Left Side (1).
  8. Fig 3: Front Floor Console Rear Trim Panel
    GM4570315Courtesy of GENERAL MOTORS COMPANY
  9. Install Front Floor Console Rear Trim Panel (2)Front Floor Console Rear Trim Panel Replacement (Terrain)
  10. Fig 4: Front Floor Console
    GM4741732Courtesy of GENERAL MOTORS COMPANY
  11. Install Front Floor Console (1) - Front Floor Console Replacement (Terrain)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.