2017 GMC Terrain SL, GasFACTORY OEM SERVICE PROCEDURE

Installation Procedure

    Fig 1: Primary Fuel Tank Module And O-Ring
    GM2239724Courtesy of GENERAL MOTORS COMPANY
  1. If replacing the fuel pump module only, install the primary fuel level sensor. Refer to Fuel Tank Fuel Pump Module Fuel Level Sensor Replacement .
  2. Install a NEW O-ring (2) and the primary fuel tank module (1).
  3. Fig 2: Cam Lock Ring
    GM2239717Courtesy of GENERAL MOTORS COMPANY
  4. Using the J-45722  wrench, install the cam lock ring (1) by turning clockwise.
  5. Fig 3: Fuel & Evaporative Emission Lines, & Electrical Connectors
    GM2239702Courtesy of GENERAL MOTORS COMPANY
  6. Connect the electrical connectors (1).
  7. Connect the fuel and evaporative emission lines (2). Refer to Plastic Collar Quick Connect Fitting Service .
  8. Connect the crossover tube to the secondary fuel pump module. Refer to Fuel Tank Fuel Pump Module Replacement - Secondary (With Out) .
  9. Install the fuel tank. Refer to Fuel Tank Replacement (AWD) Fuel Tank Replacement (FWD) .
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.