Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2017 GMC Acadia SLFACTORY OEM SERVICE PROCEDURE
Fastener Specifications
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Electronic Parking Brake Control Module Bolt | 7 N.m (62 lb in) |
| Electronic Parking Brake Control Module Bracket Bolt | 9 N.m (80 lb in) |
| Front Floor Console Trim Plate Bolt | 0.75 N.m (7 lb in) |
| Parking Brake Cable Bolt | 9 N.m (80 lb in) |
| Parking Brake Intermediate Cable Bolt | 9 N.m (80 lb in) |
| Parking Brake Intermediate Cable Nut | 6 N.m (53 lb in) |
| Parking Brake Lever Nut | 9N.m (80 lb in) |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.