Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2016 GMC Terrain SL, GasFACTORY OEM SERVICE PROCEDURE
Fastener Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Power Steering Assist Motor Bolt (Requires a NEW bolt.) | 8 N.m | 71 lb in |
| Power Steering Fluid Cooling Pipe Bolt | 9 N.m | 80 lb in |
| Power Steering Fluid Cooling Pipe Fitting | 34 N.m | 25 lb ft |
| Power Steering Fluid Cooling Pipe Nut | 9 N.m | 80 lb in |
| Power Steering Fluid Reservoir Bolt | 9 N.m | 80 lb in |
| Power Steering Fluid Reservoir Nut | 9 N.m | 80 lb in |
| Power Steering Gear Inlet Hose Fitting | 34 N.m | 25 lb ft |
| Power Steering Pump Bolt | 22 N.m | 16 lb ft |
| Steering Gear Bolt (Requires a NEW bolt.) | 110 N.m | 81 lb ft |
| Steering Gear Heat Shield Bolt | 9 N.m | 80 lb in |
| Steering Gear Pipe Fitting | 16 N.m | 12 lb ft |
| Steering Linkage Inner Tie Rod | 105 N.m | 77 lb ft |
| Steering Linkage Outer Tie Rod Nut | ||
|
25 N.m | 18 lb ft |
|
80-100 Degrees | |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.