Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
2016 GMC Acadia SLE, FWD
Quick Lookups: Fluids
2016 GMC Acadia SLE, FWDSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 7.80 OZS. | 0.23 L | PAG 46 | S | |||
| Air Cond Refrigerant | 2.50 LBS. | 1.13 KG | R-134a | S | |||
| Automatic Transmission Fluid | Drain and Refill,w/Drain Plug | N/A | N/A | Automatic Transmission Fluid DEXRON VI | Fluid Capacity is between: 4.2 to 6.3 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. | S | |
| Automatic Transmission Fluid | Overhaul | N/A | N/A | Automatic Transmission Fluid DEXRON VI | Fluid Capacity is between: 7.4 - 9.5 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. | S | |
| Automatic Transmission Fluid | Valve Body Cover Removal | N/A | N/A | Automatic Transmission Fluid DEXRON VI | Fluid Capacity is between: 5.3 to 7.4 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. | S | |
| Brake Fluid | 1.20 PTS. | 0.56 L | DOT 3 Hydraulic Brake Fluid | S | |||
| Differential Gear Oil | Rear | 0.85 QTS. | 0.8 L | SAE 75W-90 Synthetic Gear Oil | GM Part No. 89021677. | S | |
| Engine Coolant | 11.40 QTS. | 10.78 L | 50/50 mixture of DEX-COOL and clean, drinkable water | All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. | S | ||
| Engine Oil | w/Filter | 6.00 QTS. | 5.67 L | API - SAE 5W-30 | Use only engine oil licensed to the dexos1 specification or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity grade oils such as SAE 10W-30, 10W-40, or 20W-50. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. | S | |
| Engine Oil | w/o Filter | 5.50 QTS. | 5.2 L | API - SAE 5W-30 | Use only engine oil licensed to the dexos1 specification or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity grade oils such as SAE 10W-30, 10W-40, or 20W-50. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. | S | |
| Fuel Tank | 22.00 GALS. | 83.27 L | S | ||||
| Power Steering Fluid | 1.70 QTS. | 1.6 L | Automatic Transmission Fluid DEXRON VI | S | |||
| Transfer Case Fluid | 1.06 QTS. | 1 L | SAE 75W-90 Synthetic Axle Gear Oil | GM Part No. 89021677. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. | S | ||
| Windshield Washer Fluid | N/A | N/A | Windshield Washer Fluid | Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements. | S | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.