Fastener Specifications

2016 GMC Acadia SLE, FWDSECTION Fastener Specifications
Application Specifications
Metric English
Door Window Regulator Bolts 10 N.m 89 lb in
Door Window Regulator to Door Bolts 10 N.m 89 lb in
Door Window Regulator Motor Nuts to Door 9 N.m 80 lb in
Door Window Regulator Motor to Regulator Bolts 5 N.m 44 lb in
Door Window Regulator Guide Bolts 10 N.m 89 lb in
Front Side Door Outer Sealing Strip Panel Screw 1.5 N.m 13 lb in
Front Side Door Window Lower Reveal Molding Screw 5 N.m 44 lb in
Front Side Door Window Rear Channel Bolts 10 N.m 89 lb in
Front Side Door Window Weatherstrip/Run Channel Retaining Bolts 10 N.m 89 lb in
Rear Side Door Outer Sealing Strip Panel Screw 1.5 N.m 13 lb in
Rear Side Door Stationary Window Front Bolts 10 N.m 89 lb in
Rear Side Door Stationary Window Rear Bolt 10 N.m 89 lb in
Rear Side Door Window Reveal Molding Lower Screw 5 N.m 44 lb in
Rear Side Door Stationary Window Upper Screws 5 N.m 44 lb in
Rear Side Door Window Front Channel Bolts 9 N.m 80 lb in
Rear Switch Plate Screw 2 N.m 18 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.