2010 GMC Terrain SLE, 2.4 W, FWDFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 4.00 OZS. 0.11 L PAG 46 S
Air Cond Refrigerant 1.43 LBS. 0.64 KG R-134a S
Automatic Transmission Fluid 2.4L Eng Fluid Change - Drain Plug N/A N/A Automatic Transmission Fluid DEXRON VI Fluid Capacity is between: 4.2 to 6.3 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. S
Automatic Transmission Fluid 2.4L Eng Overhaul N/A N/A Automatic Transmission Fluid DEXRON VI Fluid Capacity is between: 8.5 to 9.0 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. S
Automatic Transmission Fluid 2.4L Eng Valve Body Cover Removal N/A N/A Automatic Transmission Fluid DEXRON VI Fluid Capacity is between: 5.3 to 7.4 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. S
Brake Fluid N/A N/A DOT 3 Brake Fluid S
Differential Gear Oil Rear 0.53 QTS. 0.5 L SAE 75W-90 Synthetic Axle Gear Oil GM Part No. 89021677. S
Engine Coolant 2.4L Eng 8.20 QTS. 7.76 L 50/50 mixture of DEX-COOL and clean, drinkable water All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. S
Engine Oil 2.4L Eng w/Filter 5.00 QTS. 4.73 L API - SAE 5W-30 Use oil that meets GM Standard GM6094M. For areas of extreme cold, where temperatures fall below -20Deg.F (-29Deg.C), it is recommended a SAE 5W-30 synthetic oil or a SAE 10W-30 oil. Both will provide easier cold starting and better protection for your engine at extremely low temperatures. S
Fuel Tank 2.4L Eng 18.80 GALS. 71.16 L S
Transfer Case Fluid 1.06 QTS. 1 L Transfer Case Fluid GM Part No. 88861950. S
Windshield Washer Fluid N/A N/A Optikleen Windshield Washer Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.