Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2008 GMC Acadia AWD V6-3.6LFACTORY OEM SERVICE PROCEDURE
Piston, Engine
Piston Diameter 93.956-93.974 mm (3.6990-3.6998 in)
Piston Pin Bore Diameter 24.004-24.009 mm (0.9450-0.9452 in)
Piston Ring Groove Width - First Compression Ring 1.220-1.240 mm (0.0480-0.0488 in)
Piston Ring Groove Width - Second Compression Ring 1.510-1.530 mm (0.0595-0.0602 in)
Piston Ring Groove Width - Oil Control Ring 2.510-2.530 mm (0.0988-0.0996 in)
Piston to Bore Clearance 0.026-0.052 mm (0.0010-0.0021 in)
Piston Pin Bore Diameter 24.004-24.009 mm (0.9450-0.9452 in)
Piston Ring Groove Width - First Compression Ring 1.220-1.240 mm (0.0480-0.0488 in)
Piston Ring Groove Width - Second Compression Ring 1.510-1.530 mm (0.0595-0.0602 in)
Piston Ring Groove Width - Oil Control Ring 2.510-2.530 mm (0.0988-0.0996 in)
Piston to Bore Clearance 0.026-0.052 mm (0.0010-0.0021 in)
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
