Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 GMC Canyon 2WD L4-2.9LFACTORY OEM SERVICE PROCEDURE
Piston, Engine
Piston - Piston Diameter 92.971-93.005 mm 3.6603-3.6616 in
Piston - Piston Pin Bore Diameter 23.002-23.008 mm 0.9056-0.9058 in
Piston - Piston to Bore Clearance -0.015-0.035 mm -0.0006-0.0014 in
Piston - Piston Pin Bore Diameter 23.002-23.008 mm 0.9056-0.9058 in
Piston - Piston to Bore Clearance -0.015-0.035 mm -0.0006-0.0014 in
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
