2007 GMC Canyon 2WD L4-2.9LFACTORY OEM SERVICE PROCEDURE

Piston Pin, Engine

Pin - Piston Pin Clearance to Connecting Rod Bore 0.001-0.018 mm 0.0004-0.0007 in
Pin - Piston Pin Clearance to Piston Pin Bore 0.003-0.012 mm 0.00012-0.0005 in
Pin - Piston Pin Diameter 22.996-22.999 mm 0.9054-0.9055 in
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.