Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2005 GMC Jimmy Part Time, StandardFACTORY OEM SERVICE PROCEDURE
Fuel Tank Draining Procedure (2-Door Utility)
CAUTION:
Gasoline or gasoline vapors are highly flammable. A fire could occur if an ignition source is present. Never drain or store gasoline or diesel fuel in an open container, due to the possibility of fire or explosion. Have a dry chemical (Class B) fire extinguisher nearby.
- Disconnect the negative battery cable.
- Remove the fuel filler cap.
- Disconnect the fuel fill hose from the fuel tank (4-door utility only). Refer to Filler Tube Replacement (2-Door Utility) or Filler Tube Replacement (4-Door Utility Lower) .
- Use a hand operated pump device in order to remove the fuel through the fuel filler pipe (2-door utility), or through the fuel tank fill pipe nipple (4-door utility).
CAUTION:
Refer to Battery Disconnect Caution in Cautions and Notices.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.