Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2005 GMC Jimmy Part Time, AutomaticFACTORY OEM SERVICE PROCEDURE
Fastener Tightening Specifications
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Catalytic Converter to Exhaust Manifold Stud Nuts (4.3L) | 53 N.m | 39 lb ft |
| Catalytic Converter to Muffler Flange nuts (4.3L) | 40 N.m | 30 lb ft |
| Exhaust Manifold Bolts and Stud (4.3L) | ||
|
15 N.m | 11 lb ft |
|
30 N.m | 22 lb ft |
| Exhaust Manifold Heat Shield Bolts | 12 N.m | 106 lb in |
| Hanger to Frame Bolts | 17 N.m | 13 lb ft |
| Oil Level Indicator Tube Bolt (4.3L) | 12 N.m | 106 lb in |
| Radiator Inlet Hose Support Bracket Nut (4.3L) | 36 N.m | 27 lb ft |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
