2005 GMC Jimmy Part Time, AutomaticFACTORY OEM SERVICE PROCEDURE

Removal Procedure

  1. Remove the front seat from the vehicle. Refer to Seat Replacement - BucketΒ .
  2. Fig 1: View Of Memory Seat Module Harness Connectors
    GM618544Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the memory seat module harness connectors.
  4. Fig 2: View Of Memory Seat Control Module
    GM618548Courtesy of GENERAL MOTORS CORP.
  5. Remove the 2 screws securing the memory module bracket to the seat adjuster frame.
  6. Remove the memory module bracket with the module.
  7. Remove the module from the bracket.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.