Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2005 GMC Jimmy Automatic, AutomaticFACTORY OEM SERVICE PROCEDURE
Wheel Alignment Specifications
Wheel Alignment Specifications
| Suspension | Caster | Cross Caster (L-R) | Camber | Cross Camber (L-R) | Total Toe | Steering Wheel Angle | |
|---|---|---|---|---|---|---|---|
| Left | Right | ||||||
| S10 Blazer & Jimmy Canadian, Hi Wider 4WD, Crew Cab Pickup | 2.8° +/- 1.0° | 3.3° +/- 1.0° | -0.5° +/- 0.75° | 0.0° +/- 1.0° | 0.0° +/- 0.60° | +0.10° +/- 0.20° | -0.5° +/- 3.5° |
| S10 Blazer & Jimmy Canadian Hi Wider 2WD | 2.8° +/- 1.0° | 3.3° +/- 1.0° | -0.5° +/- 0.75° | 1.25° +/- 1.0° | 0.0° +/- 0.60° | +0.10° +/- 0.20° | -0.5° +/- 3.5° |
| S10 Extreme Blazer & Jimmy Canadian | 4.7° +/- 1.0° | 5.2° +/- 1.0° | -0.5° +/- 0.75° | 0.0° +/- 1.0° | 0.0° +/- 0.60° | +0.10° +/- 0.2° | -0.5° +/- 3.5° |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.