2004 GMC Jimmy 2D Utility, Part Time, AutomaticFACTORY OEM SERVICE PROCEDURE

Removal Procedure

    Fig 1: Identifying Accelerator Cable/Throttle Body Lever
    GM325556Courtesy of GENERAL MOTORS CORP.
  1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Resonator Replacement .
  2. Disconnect the accelerator cable from the throttle body.
    3. Fig 2: View Of Accelerator Control Cable Bracket
    GM616725Courtesy of GENERAL MOTORS CORP.
  3. Remove the accelerator cable from the accelerator control cable bracket.
    4. Fig 3: View Of Cable Routing Bracket
    GM616709Courtesy of GENERAL MOTORS CORP.
  4. Remove the accelerator cable from the cable routing bracket.
    5. Fig 4: Locating Accelerator Cable Bracket Clip
    GM616703Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the accelerator cable (1) from the bracket clip (2).
  6. Remove the left closeout/insulator panel. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gauges, and Console.
    7. Fig 5: View Of Accelerator Cable At Accelerator Pedal
    GM424544Courtesy of GENERAL MOTORS CORP.
  7. Remove the accelerator cable from the accelerator pedal.
    8. Fig 6: Locating Accelerator Cable Components
    GM616727Courtesy of GENERAL MOTORS CORP.
  8. Remove the accelerator cable panel insulator retainer (2) from the accelerator cable (1).
  9. Squeeze the accelerator cable tangs (3) and push the cable through the bulkhead (4).
  10. Remove the accelerator cable.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.