Quick Lookups: Fluids

2003 GMC Yukon Base, 4.8 V, RWDSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil w/o Rear AC 8.00 OZS. 0.23 L PAG 46 S
Air Cond Compressor Oil w/Rear A/C 11.00 OZS. 0.32 L PAG 46 S
Air Cond Refrigerant 2.71 LBS. 1.22 KG R-134a S
Automatic Transmission Fluid Trans Mfr CD 4L60E/M30 Overhaul 11.00 QTS. 10.4 L Automatic Transmission Fluid DEXRON VI Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. S
Automatic Transmission Fluid Trans Mfr CD 4L60E/M30 Pan Removal 5.00 QTS. 4.73 L Automatic Transmission Fluid DEXRON VI Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. S
Brake Fluid N/A N/A DOT 3 Brake Fluid S
Differential Gear Oil 10.5" Rear Axle 2.75 QTS. 2.6 L SAE 75W-90 Synthetic Gear Oil S
Differential Gear Oil 8.6" Rear Axle 2.15 QTS. 2.03 L SAE 75W-90 Synthetic Gear Oil S
Differential Gear Oil 9.5" Rear Axle 2.75 QTS. 2.6 L SAE 75W-90 Synthetic Gear Oil S
Differential Gear Oil 9.75" Rear Axle 3.00 QTS. 2.83 L SAE 75W-90 Synthetic Gear Oil S
Differential Gear Oil Front,8 1/4" 1.51 QTS. 1.42 L 4WD:SAE 80W-90 Gear Oil; AWD: SAE 75W-90 Synthetic Gear Oil S
Differential Gear Oil Front,9 1/4" 1.83 QTS. 1.73 L 4WD:SAE 80W-90 Gear Oil; AWD: SAE 75W-90 Synthetic Gear Oil S
Engine Coolant 4.8L Eng w/Front A/C 14.40 QTS. 13.62 L 50/50 mixture of DEX-COOL and clean, drinkable water S
Engine Coolant 4.8L Eng w/Front & Rear Unit 15.80 QTS. 14.95 L 50/50 mixture of DEX-COOL and clean, drinkable water S
Engine Oil 4.8L Eng w/Filter 6.00 QTS. 5.67 L API - SAE 5W-30 S
Fuel Tank 26.00 GALS. 98.42 L S
Power Steering Fluid N/A N/A GM Power Steering Fluid S
Transfer Case Fluid 2.00 QTS. 1.89 L AUTO TRAK II Fluid S
Windshield Washer Fluid N/A N/A Optikleen Windshield Washer Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.