2003 GMC Sierra 1500 HD, RWDFACTORY OEM SERVICE PROCEDURE

Cruise Control DTCS

CRUISE CONTROL DIAGNOSTIC TROUBLE CODE (DTC) LIST

DTC Description
DTC P0567 (4.8L, 5.3L, 6.0L and 8.1L) Resume/Accel Switch Is Applied For Longer Than 90 Seconds
DTC P0567 (6.6L) Resume/Accel Switch Is Applied For Longer Than 90 Seconds
DTC P0568 (4.8L, 5.3L, 6.0L, and 8.1L) Set/Coast Switch Is On For Longer Than 90 Seconds
DTC P0568 (6.6L) Set/Coast Switch Is On For Longer Than 90 Seconds
DTC P0571 (4.8L, 5.3L, 6.0L, and 8.1L) Low Voltage Signal On The TCC Brake Switch/Cruise Control Release Signal Circuit
DTC P0571 (6.6L) Low Voltage Signal On The TCC Brake Switch/Cruise Control Release Signal Circuit
DTC P1574 Rapid Vehicle Speed Decreases
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.