Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2001 GMC C3500 HD 8.1 G, AutomaticFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Refrigerant | 2.00 LBS. | 0.9 KG | R-134a | H | |||
| Automatic Transmission Fluid | 7.70 QTS. | 7.28 L | Automatic Transmission Fluid DEXRON VI | Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. | H | ||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | H | |||
| Differential Gear Oil | Dana 80 | 4.23 QTS. | 4 L | SAE 75W-140 Synthetic Gear Oil | H | ||
| Engine Coolant | 8.1L Eng | 28.50 QTS. | 26.97 L | 50/50 mixture of DEX-COOL and clean, drinkable water | H | ||
| Engine Oil | 8.1L Eng | 6.60 QTS. | 6.24 L | API - SAE 5W-30 | SAE 5W-30 is best for your vehicle. However, use 10W-30 if the outside temperature is higher than 18Deg.C (0Deg.F). Do not use other viscosity oils, such as SAE 20W-50. If your vehicle is operated in an area where the temperature falls below -29Deg.C (-20Deg.F), consider using a SAE 0W-40 oil, it will provide easier cold starting and better protection for the engine at extremely low temperatures. | H | |
| Fuel Tank | Gas | Front | 22.00 GALS. | 83.27 L | H | ||
| Fuel Tank | Gas | Rear | 18.00 GALS. | 68.13 L | H | ||
| Manual Transmission Fluid | 4.00 QTS. | 3.78 L | GM Synthetic Manual Transmission Fluid | H | |||
| Power Steering Fluid | 0.87 QTS. | 0.82 L | GM Power Steering Fluid | H | |||
| Windshield Washer Fluid | N/A | N/A | Optikleen Windshield Washer Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | H | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.
