2001 GMC C3500 HD 6.5 F, AutomaticFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Refrigerant 2.00 LBS. 0.9 KG R-134a H
Automatic Transmission Fluid 7.70 QTS. 7.28 L Automatic Transmission Fluid DEXRON VI Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. H
Brake Fluid N/A N/A DOT 3 Brake Fluid H
Differential Gear Oil Dana 80 4.23 QTS. 4 L SAE 75W-140 Synthetic Gear Oil H
Engine Coolant 6.5L Eng w/o Rear Heater 23.50 QTS. 22.23 L 50/50 mixture of DEX-COOL and clean, drinkable water H
Engine Coolant 6.5L Eng w/Rear Heater 27.50 QTS. 26.02 L 50/50 mixture of DEX-COOL and clean, drinkable water H
Engine Oil 6.5L Eng w/Filter 8.00 QTS. 7.57 L API - SAE 15W-40 SAE 15W-40 is best for your vehicle. However, you can use SAE 10W-30 if it's going to be colder than (0°C) 32°F before your next oil change. When it's very cold, below (-18°C) 0°F, you should use SAE 10W-30 to improve cold starting. SAE 30 may be used at temperatures above freezing, (0°C) 32°F. These numbers on the oil container show its viscosity, or thickness. Do not use other viscosity oils such as SAE 10W-40 or SAE 20W-50. H
Fuel Tank Diesel 42.00 GALS. 158.98 L H
Manual Transmission Fluid 4.00 QTS. 3.78 L GM Synthetic Manual Transmission Fluid H
Power Steering Fluid 0.87 QTS. 0.82 L GM Power Steering Fluid H
Windshield Washer Fluid N/A N/A Optikleen Windshield Washer Fluid Follow the Manufacturer's Instructions for the mixture ratio. H
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.