Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1997 GMC Jimmy 4D Utility, AWDFACTORY OEM SERVICE PROCEDURE
Torque Specifications
| Item | Specification |
|---|---|
| 2.2L | |
| Lower Mounting Bolt | 22 Ft. lbs. (30 N.m) |
| Upper Mounting Bolt | 32 Ft. lbs. (43 N.m) |
| Rear Mounting Bolt | 22 Ft. lbs. (30 N.m) |
| Brace to Engine Nuts | 22 Ft. lbs. (30 N.m) |
| Nut on Generator BAT Terminal | 71 In. lbs. (8 N.m) |
| 4.3L | |
| Brace to Engine Nut | 22 Ft. lbs. (33 N.m) |
| Brace to Generator Bolt | 18 Ft. lbs. (25 N.m) |
| Left Mounting Bolt | 36 Ft. lbs. (50 N.m) |
| Right Through Mounting Bolt | 18 Ft. lbs. (25 N.m) |
| Nut on Generator BAT Terminal | 71 In. lbs. (8 N.m) |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.