1996 GMC Yukon 4D Utility, 4WDFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil w/o Rear AC,w/Denso Compressor 8.00 OZS. 0.23 L PAG 46 S
Air Cond Compressor Oil w/OE Harrison Compressor,w/o Rear AC 8.00 OZS. 0.23 L PAG 150 S
Air Cond Compressor Oil w/OE Harrison Compressor,w/Rear A/C 11.00 OZS. 0.32 L PAG 150 S
Air Cond Compressor Oil w/Rear A/C,w/Denso Compressor 11.00 OZS. 0.32 L PAG 46 S
Air Cond Refrigerant w/o Rear Unit 2.25 LBS. 1.02 KG R-134a S
Air Cond Refrigerant w/Rear Unit 4.00 LBS. 1.81 KG R-134a S
Automatic Transmission Fluid 5.7L Eng,Trans Mfr CD 4L60E/M30 Overhaul 11.00 QTS. 10.4 L Automatic Transmission Fluid DEXRON VI Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. S
Automatic Transmission Fluid 5.7L Eng,Trans Mfr CD 4L60E/M30 Pan Removal and Replacement 5.00 QTS. 4.73 L Automatic Transmission Fluid DEXRON VI Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. S
Brake Fluid N/A N/A DOT 3 Brake Fluid S
Differential Gear Oil 4WD 8 1/4" Axle 2.25 QTS. 2.12 L API - GL-5, SAE 80W-90 Gear Oil S
Differential Gear Oil Rear,8 1/2",8 5/8" 2.10 QTS. 1.98 L API - GL-5, SAE 80W or 80W-90 Gear Oil S
Differential Gear Oil Rear,9 1/2",9 3/4" (Dana) 2.75 QTS. 2.6 L API - GL-5, SAE 80W or 80W-90 Gear Oil S
Engine Coolant 5.7L Eng w/o Rear Heater 17.50 QTS. 16.56 L 50/50 mixture of DEX-COOL and clean water (preferably distilled) S
Engine Coolant 5.7L Eng With Rear Heater 20.00 QTS. 18.92 L 50/50 mixture of DEX-COOL and clean water (preferably distilled) S
Engine Oil 5.7L Eng 5.00 QTS. 4.73 L API - SAE 5W-30 (Below 0Deg.F to Above 100Deg.F), 10W-30 (Above 0Deg.F to Above 100Deg.F) S
Fuel Tank 34.00 GALS. 128.7 L S
Power Steering Fluid N/A N/A GM Power Steering Fluid GM Part No. 1050017. S
Transfer Case Fluid 2.25 QTS. 2.12 L Automatic Transmission Fluid DEXRON III S
Windshield Washer Fluid N/A N/A Optikleen Windshield Washer Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.