Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1996 GMC Pickup C2500, 2D Pickup, 6.5 F, StandardFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | w/Denso Compressor | 8.00 OZS. | 0.23 L | PAG 46 | S | ||
| Air Cond Compressor Oil | w/OE Harrison Compressor or HT6 Compressor | 8.00 OZS. | 0.23 L | PAG 150 | S | ||
| Air Cond Refrigerant | Pickup | 2.00 LBS. | 0.9 KG | R-134a | S | ||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | S | |||
| Differential Gear Oil | Front | 1.75 QTS. | 1.65 L | API - GL-5, SAE 80W-90 Gear Oil | S | ||
| Differential Gear Oil | Rear,10 1/2" ring gear | 2.75 QTS. | 2.6 L | API - GL-5, SAE 80W-90 Gear Oil | S | ||
| Differential Gear Oil | Rear,8 1/2", 8 5/8 ring gear | 2.10 QTS. | 1.98 L | API - GL-5, SAE 80W-90 Gear Oil | S | ||
| Differential Gear Oil | Rear,9 1/2" | 2.75 QTS. | 2.6 L | API - GL-5, SAE 80W-90 Gear Oil | S | ||
| Differential Gear Oil | Rear,Dana 11" ring gear | 4.10 QTS. | 3.88 L | SAE 75W-90 Synthetic Gear Oil | S | ||
| Engine Coolant | 6.5L Eng | 27.50 QTS. | 26.02 L | 50/50 mixture of DEX-COOL and clean water (preferably distilled) | S | ||
| Engine Oil | 6.5L Eng | w/Filter | 8.00 QTS. | 7.57 L | API - SAE 15W-40 (Above 0Deg.F) (Preferred), 10W-30 (Below 0Deg.F), 30 (Above 32Deg.F) | S | |
| Fuel Tank | 8 FT. Bed Len | 34.00 GALS. | 128.7 L | S | |||
| Manual Transmission Fluid | Trans Mfr CD NV4500/MW3 | 4.00 QTS. | 3.78 L | API - GL-4, SAE 75W-90 Synthetic | S | ||
| Power Steering Fluid | 1.00 QTS. | 0.94 L | GM Power Steering Fluid | GM Part No. 1050017. | S | ||
| Windshield Washer Fluid | N/A | N/A | Optikleen Windshield Washer Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.