1996 GMC Jimmy 4D Utility, AWDFACTORY OEM SERVICE PROCEDURE

Torque Specifications

Item Specification
2.2L
Brace to Generator Mounting Bolt 22 Ft. lbs. (30 N.m)
Lower Brace to Engine Nut 36 Ft. lbs. (50 N.m)
Rear Mounting Bolt 32 Ft. lbs. (43 N.m)
Upper Brace to Engine Nut 22 Ft. lbs. (30 N.m)
Nut on Generator BAT Terminal 71 In. lbs. (8 N.m)
4.3L
Brace to Generator Bolt 18 Ft. lbs. (25 N.m)
Brace to Generator Bracket Bolt 36 Ft. lbs. (50 N.m)
Generator Mounting Bolts 36 Ft. lbs. (50 N.m)
Nut on Generator BAT Terminal 71 In. lbs. (8 N.m)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.