1992 GMC Forward Control 7.4 NFACTORY OEM SERVICE PROCEDURE

To Increase Speed

WARNING: This page is about a different car, the 1995 Plymouth Voyager, 1995 Plymouth Grand Voyager, 1995 Dodge Grand Caravan, 1995 Dodge Caravan, and 1995 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.

With speed control system on, increase set speed by pressing and releasing RESUME/ACCEL button. Each pressing of button will cause a speed increase of 2 MPH. For example, 3 presses would result in an increased speed of 6 MPH. To increase speed gradually, hold RESUME/ACCEL button down until desired speed is reached. When button is released, new set speed will be maintained.

NOTE: Speed control system will automatically disengage when vehicle speed drops to less than 35 MPH or rises to more than 85 MPH.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.