1990 GMC Forward Control 3.9 LFACTORY OEM SERVICE PROCEDURE

Repair and Diagnosis: Transmission: Clutches: Description

The mechanical clutch consists of a clutch disc, pressure plate and a release bearing. All "G" series have a pull rod from clutch pedal that moves a cross lever. All "P" series trucks have an upper pull rod from clutch pedal to bellcrank, and a lower pull rod from bellcrank to cross lever. On all models, the cross lever moves clutch fork and releases bearing with an adjustable rod.

TRANSMISSION APPLICATION

Vehicle Model Transmission Model
"G" Series New Process 89 MM 4-Speed O/D
"P" Series Muncie 85 MM 4 & 5-Speed
Muncie 117 MM 5-Speed
Chapter Navigation
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.