Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Freightliner Sprinter 2500 V6-3.0L DSL TurboFACTORY OEM SERVICE PROCEDURE
Additional Maintenance Work
Additional Maintenance Work
Every 2 years
- Change brake fluid
During every second maintenance service
- Air cleaner without maintenance indicator: Air cleaner filter element renewal
- Automatic transmission oil and filter change.
- Check belts for wear and signs of damage
- Spark plugs replaced
For first time at 144 000 km (90,000 miles).
- Loading of diesel particle filter checked, diesel particle filter replaced if necessary.
Additional Maintenance Work After....Years
Every 2 years
- Change brake fluid
Every 3 years
- Air cleaner filter element renewal (note installation date)
Every 10 years or 96 000 km (60,000 miles).
- Automatic transmission fluid and filter change
Every 10 years or 288 000 km (180,000 miles).
- Change rear axle fluid
Every 15 years or 288 000 km (180,000 miles).
- Coolant renewal (Note coolant composition)
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.