Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2006 Freightliner Sprinter 2500 L5-2.7L DSL TurboFACTORY OEM SERVICE PROCEDURE
Timing Chain
Timing Chain, Chain Tensioner
Bolt-Camshaft Sprocket to Exhaust Camshaft 18 Nm (159 inch lbs.)
Bolt-Intermediate Gear of High Pressure Pump to Cylinder Head 40 Nm (29.5 ft. lbs.)
Timing Chain Tensioner to Timing Case Cover 8 Nm (59 ft. lbs.)
Bolt-Camshaft Sprocket to Exhaust Camshaft 18 Nm (159 inch lbs.)
Bolt-Intermediate Gear of High Pressure Pump to Cylinder Head 40 Nm (29.5 ft. lbs.)
Timing Chain Tensioner to Timing Case Cover 8 Nm (59 ft. lbs.)
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.